Ford Mustang Quiz
Climate Control System

Suction Accumulator

In this manual: Climate Control System
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Material

Item Specification
PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN- 12-C) WSH-M1C231- B

Removal and Installation

1. Recover the refrigerant. For additional information, refer to Section.

2. Disconnect the A/C cycling switch electrical connector.

Suction Accumulator

3. Remove the cycling switch.

Suction Accumulator

4. Disconnect the suction line spring lock coupling.

  • Discard the O-ring seals.
Suction Accumulator

5. Remove the clamp nut.

Suction Accumulator

6. Disconnect the suction accumulator from the evaporator outlet.

  • Discard the O-ring seals.
Suction Accumulator

7. Remove the suction accumulator.

Suction Accumulator

8. To install, reverse the removal procedure.

  • Install new O-ring seals lubricated in clean PAG oil.
  • Lubricate the refrigerant system with the correct amount of clean PAG oil. For additional information, refer to Section.

9. Evacuate, leak test and charge the refrigerant system. For additional information, refer to Section.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.