Ford Mustang Quiz
Instrumentation and Warning Systems

Switch - Key-In-Ignition Warning

In this manual: Instrumentation and Warning Systems
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal

1. Remove the ignition switch lock cylinder.

1. Insert the ignition key and turn to the RUN position.

2. Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.

Switch - Key-In-Ignition Warning

2. Remove the key-in-ignition warning switch.

1. Release the clip.

2. Push the key-in-ignition warning switch off the rear of the ignition switch lock cylinder.

Switch - Key-In-Ignition Warning

Installation

1. To install, reverse the removal procedure.

  • Verify ignition switch lock cylinder operation.
Switch - Key-In-Ignition Warning

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.