Ford Mustang Quiz
Automatic Transmission

Transmission Support Crossmember

In this manual: Automatic Transmission
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Raise and support the vehicle. For additional information, refer to Section.

2. Support the transmission with a suitable transmission jack.

3. Remove the crossmember.

1. Disconnect the HO2S sensors and position them aside.

2. Remove the bolts from the crossmember to the extension housing.

3. Remove the bolts from the crossmember to the body and remove the crossmember.

Transmission Support Crossmember

4. To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.