Vacuum Control Motor - Air Damper Door
Removal
1. Remove the instrument panel. For additional information, refer to Section.
2. Disconnect the vacuum hose.
3. Remove the vacuum control motor.
1. Remove the steel clip.
2. Loosen the nuts.
Installation
1. To install, reverse the removal procedure.
Vacuum Control Motor -Windshield/Defroster Door
Removal
1. Remove the instrument panel. For additional information, refer to Section.
2. Unclip the control arm.
3. Remove the vacuum control motor.
1. Disconnect the vacuum lines.
2. Loosen the nuts.
Installation
1. To install, reverse the removal procedure.
Vacuum Reservoir Tank
Removal
1. Access the vacuum reservoir tank through the glove compartment.
2. Remove the reservoir.
1. Disconnect the vacuum connector.
2. Remove the screw.
Installation
1. To install, reverse the removal procedure.
Test yourself
A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.