Honda Civic Quiz
Powertrain

Engine Oil Pressure Switch Removal and Installation (Except K24Z7)

In this manual: Powertrain
Accessories — 57Body — 310Chassis — 96Electrical — 15HVAC — 39Powertrain — 300Moonroof/Sunroof — 9Roof Drainage — 5Wiper Arm/Nozzle Adjustment — 1ELD Removal and Installation — 1Under-Dash Fuse/Relay Box Removal and Installation (KA KX models without Keyless Access System) — 1Under-Dash Fuse/Relay Box Removal and Installation (KA models with Keyless Access System) — 1
~1min read

723120

Removal

  1. Oil Pressure Switch

1.

Remove the oil pressure switch (A).

2.

Remove any old liquid gasket from the switch mounting hole.

Installation

  1. Oil Pressure Switch

1.

Apply liquid gasket (P/N 08718-0004 or 08718-0009) to the oil pressure switch threads. Install the component within 5 minutes of applying the liquid gasket.

NOTE:

Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the oil pressure switch.

If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.

2.

Install the oil pressure switch (A).

Test yourself

A quick Honda Civic quiz: every answer comes with an explanation and a link to the manual page.