Inspecting and Changing Fuses

1. 1
   Turn the ignition switch to LOCK 0*1. Turn headlights and all accessories off.
2. 2
   Remove the fuse box cover.
3. 3
   Check the large fuse in the engine compartment.

   ► If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one.

   

4. 4
   Inspect the small fuses in the engine compartment and the vehicle interior.

   ► If there is a burned out fuse, remove it with the fuse puller and replace it with a new one.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.

Inspecting and Changing Fuses

NOTICE Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.

There is a fuse puller on the back of the engine compartment fuse box cover.