Rocker Arm Oil Pressure Switch Removal and Installation (K24Z7)

1.

Remove the cowl top wiper covers (A).

2.

Remove the wiper arms (B).

1.

Remove the side cowl cover (A).

2.

The left side is shown; repeat on the right side.

1.

Remove the center cowl cover (A).

2.

Disconnect the windshield washer tube (B).

3.

If necessary, remove the hood rear seal (C).

1.

Remove the under cowl panel (A).

1.

Remove the rocker arm oil control valve assembly (A) and the rocker arm oil control valve filter (B).

2.

Remove the engine wire harness bracket (C).

1.

Remove the rocker arm oil pressure switch.

1.

Install the rocker arm oil pressure switch (A) with a new O-ring (B).

1.

Install the engine wire harness bracket (A).

2.

Install the rocker arm oil control valve assembly (B) and the rocker arm oil control valve filter (C).

1.

Install the under cowl panel (A).

1.

If necessary, install the hood rear seal (A).

2.

Connect the windshield washer tube (B).

3.

Install the center cowl cover (C).

1.

Install the side cowl cover (A).

2.

The left side is shown; repeat on the right side.

1.

Install the wiper arms (A).

2.

Install the cowl top wiper covers (B).