Carefully pry off the trunk light (A) to the side to release the hook and pull out the trunk light.
3.
Disconnect the connector.
Test
Trunk Light - Test
NOTE: When doing the trunk light test, make sure to install the bulb correctly.
1.
Check for continuity between terminals No. 1 () and No. 2 (). If there is no continuity, check the bulb. Is the bulb is OK, replace the trunk light (A):
Make sure the correct test lead (+or -) is placed on the terminal.
When checking for continuity across the diode, use the diode setting () on the digital volt/ohm meter to check the diode bias.
Be aware of this characteristic; a diode is one that conducts fully in one direction (forward) and not at all in the opposite direction (reverse).
Installation
Trunk Light
1.
Connect the connector.
2.
Install the trunk light (A).
?
Test yourself
A quick Honda Civic quiz: every answer comes with an explanation and a link to the manual page.
tmnklight:
Test
) and No. 2 (
). If there is no continuity, check the bulb. Is the bulb is OK, replace the trunk light (A):
) on the digital volt/ohm meter to check the diode bias.
