What to Do After the Engine Starts

Once your vehicle's engine has started, remove the jumper cables in the following order.

1. 1
   Disconnect the jumper cable from your vehicle's ground.
2. 2
   Disconnect the other end of the jumper cable from the booster battery - terminal.
3. 3
   Disconnect the jumper cable from your vehicle's battery + terminal.
4. 4
   Disconnect the other end of the jumper cable from the booster battery + terminal.

Have your vehicle inspected by a nearby service station or a dealer.

What to Do After the Engine Starts

The VSA and CMBSTM* indicators may come on when your turn the ignition switch to ON *1 after re-connecting a battery. Drive a short distance at more than12 mph (20 km/h).

Each indicator should go off. If either or both do not, have your vehicle checked by a dealer.