Second generation (2007-2026)

HFT-Navigation Microphone Removal/Installation (With Navigation)

4steps
~24min
2/5difficulty
010203040502.92N·mlb·ft
Tightening torque found on this page
Done 0 of 4
  1. Remove the front individual map light lens (A) using a flat-tip screwdriver.

  2. Remove the bolts (B), then disconnect the connectors, and remove the map light housing (C).

  3. Carefully pry off the microphone housing (D) from the map light housing while pressing the retaining tabs (E).

  4. Install the microphone in the reverse order removal.

Test yourself

A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.