Front Seat-Back Cover/Pad Replacement (Part - 3)

Driver's seat: Pull out the side airbag harness (A) through the harness holes (B) in the seat-back pad (C) and the seat-back cover (D).

Pinch the tabs (A) on the end of the head restraint guides (B), and remove the guides from the seat-back.

Remove the seat-back cover/pad (A) from the seat-back frame (B).

Remove airbag attachment wire A from the outside reinforcing cloth (C), and remove airbag attachment wire B from the inside reinforcing cloth (D).

Install the cover in the reverse order of removal, and note these items:

• Before installing the seat-back cover/pad, make sure airbag attachment wires A and B are installed correctly in the reinforcing cloths (C).

• Reinstall airbag attachment wires A and B securely.

• Use only original Honda replacement seat-back cover/pads.

• Make sure the side airbag harness and the ODS unit harness (passenger's seat) are routed properly.