Rear Seat-Back Cover/Pad Replacement

Special Tools Required

• KTC Trim Tool Set SOJATP2014

*Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

• Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

• Take care not to tear or damage the seat covers.

• Put on gloves to protect your hands.

• The left rear seat is shown, the right rear seat is similar.

1. 1

   Remove the rear seat assembly.

2. 2

   Remove the seat-back.

3. 3

   Remove the these items:

   • Latch cover

   • Striker hole cover

4. 4

   Release the hooks (A), then remove the tether anchor cover (B).

5. 5

   Release the hook strip (A), and unzip the seat-back cover and pull back the cover (B).

6. 6

   Release the hooks (A) from the seat-back frame (B).

7. 7

   Pull out the seat-back cover/pad (A) from the frame. Pinch the tabs on the end of the head restraint guides (B, C), and remove the guides from the seat-back.

8. 8

   Release the hooks (A) from the seat-back frame (B).

9. 9

   Remove the seat-back cover/pad (A) and the silencer (B) from the seat-back frame (C). If necessary, release the hooks (D) and remove the latch lever inner cover (E).

10. 10

    Install the seat-back cover/pad in the reverse order of removal. To prevent wrinkles when installing the seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks.