Steering Angle Sensor Replacement

SRS components are located in this area. Review the SRS component locations and the precautions and procedures.

NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.

1. 1

   With the wheels in the straight ahead position and the steering wheel centered, remove the steering wheel.

2. 2

   Remove the steering column covers and the cable reel.

3. 3

   Remove the combination switch assembly.

4. 4

   Remove the combination light switch (A) and the wiper/washer switch (B) from the combination switch body assembly (C).

5. 5

   Install the combination switch body assembly in the reverse order of removal.

   NOTE:

   • Do not remove the steering angle sensor from the combination switch body.

   • When installing the cable reel, set the turn signal canceling sleeve position so that the arrow points straight up.

   • Tighten the combination switch assembly/cable reel mounting screw in the proper sequence.