Honda Fit Quiz
Second generation (2007-2026)

Valve Stem-to-Guide Clearance Inspection

In this manual: Second generation (2007-2026)
First generation (2001–2008) — 118Second generation (2007-2026) — 923
2steps
~12min
1/5difficulty
Done 0 of 2

  1. Remove the valves.

  2. Subtract the O.D. of the valve stem, measured with a micrometer, from the I.D. of the valve guide, measured with an inside micrometer or ball gauge.

    Take the measurements in three places along the valve stem and three places inside the valve guide.

    The difference between the largest valve guide measurement and the smallest valve stem measurement should not exceed the service limit.

    Intake Valve Stem-to-Guide Clearance

    Standard (New):

    0.020-0.050 mm (0.00079-0.00197 in)

    Service Limit:

    0.08 mm (0.0031 in)

    Exhaust Valve Stem-to-Guide Clearance

    Standard (New):

    0.050-0.080 mm (0.00197-0.00315 in)

    Service Limit:

    0.11 mm (0.0043 in)

Test yourself

A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.