Second generation (2007-2026)
Warm Up TWC Removal/Installation
In this manual: Second generation (2007-2026)
9steps
~54min
2/5difficulty
Done 0 of 9
NOTE: If the warm up TWC is damaged internally, inspect the under-floor TWC for debris.
Raise the vehicle on a lift.
Remove the bolts (A).

Lower the vehicle.
Remove the A/F sensor (Sensor 1).
Remove the EGR pipe.
Remove the cover (A).

Remove the bolts (B) and the nuts (C).
Remove the WU-TWC (D).
Install the parts in the reverse order of removal with new gaskets (E).
Test yourself
A quick Honda Fit quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?