A/T Secondary Shaft Sealing Ring Replacement (A/T)

The sealing rings are synthetic resin with chamfered ends. Check the condition of the sealing rings, and replace them only if they are worn, distorted, or damaged.

1. 1

   For a better fit, squeeze sealing rings together slightly before installing them.

   

2. 2

   Apply ATF to the new sealing rings, then install them on the secondary shaft.

   

3. 3

   After installing the sealing rings, verify the following:

   • The rings are fully seated in the groove.

   • The rings are not twisted.

   • The chamfered ends of the rings are properly joined.