HVAC
A/C Compressor Relief Valve Replacement
In this manual: HVAC
6steps
~36min
2/5difficulty
Done 0 of 6
Recover the refrigerant with a recovery/recycling/charging station.
Remove the relief valve (A) and the O-ring (B). Plug the opening to keep moisture and foreign material from entering the system and the A/C compressor oil from running out.
Clean the mating surfaces.
Replace the O-ring with a new one at the relief valve, and apply a thin coat of refrigerant oil before installing it.
Remove the plug, and install and tighten the relief valve.
Charge the system.
Was this page helpful?