Features

Audio System Theft Protection

~1min read

The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead.

■ Reactivating the audio system 1. Turn the ignition switch to ON , and turn on the audio system. ► If you turn the ignition switch to ACCESSORY , you will be requested to enter the audio security code. See step 3. 2. Press and hold the power volume knob again for more than two seconds. ► The audio system is reactivated when the system’s control unit recognizes that the system is in your vehicle.

If the control unit fails to recognize, ENTER CODE appears on the audio/ information screen. 3. Enter the audio security code using the preset buttons. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter the code correctly after 10 tries, leave the system for one hour before trying again, or visit a dealer to have the system reset.

You can find out about your serial number and security code from a dealer.

U.S. models

You can register the security code at Owner Link (owners.honda.com.), and find information on how to retrieve the serial number and obtain the code at radio-navicode.honda.com.