Chassis

Brake Hose and Line Inspection

4steps
~24min
2/5difficulty
0204060801003526N·mlb·ft
Tightening torque found on this page
Done 0 of 4
  1. Inspect the brake hoses for damage, deterioration, leaks, interference, and twisting.

  2. Check the brake lines for damage, rusting, and leaks. Also check for bent brake lines.

  3. Check for leaks at hose and line joints and connections, and retighten if necessary.

  4. Check the master cylinder and the VSA modulator-control unit for damage and leaks.

    Connection Point

    Component

    Connected to

    Specified Torque

    Note

    A

    Front brake caliper

    Brake hose

    35 N·m

    Banjo bolt

    Bleed screw

    8,5 N·m

    B

    Rear brake caliper

    Brake hose

    35 N·m

    Banjo bolt

    Bleed screw

    8,3 N·m

    C

    Brake hose

    Brake line

    15 N·m

    Flare nut

    D

    Master cylinder

    Brake line

    22 N·m

    Flare nut

    E

    VSA modulator-control unit

    Brake line (12 mm nut)

    22 N·m

    Flare nut

    Brake line (10 mm nut)

    15 N·m

    Flare nut