Center Display Lens Removal/Installation
NOTE:
Do this procedure in a clean place free from dirt and dust.
Wear latex or vinyl gloves when doing this procedure (Do not use fabric gloves).
When removing the center display lens, do not touch the LCD facing.
If there is dirt on the LCD facing, blow it clean with compressed air.
When installing the center display lens onto the LCD assembly, be careful not to touch the LCD facing.
Check that the center display lens and the LCD assembly are properly installed.
Check that the center display unit assembly has no damage.
When removing the center display lens, do not hold the LCD facing down.
Remove the center display unit.
Remove the screws and the LCD assembly (A) from the center display lens (B).
Install the center display lens reverse order of removal.