Maintenance
Changing the Wiper Blade Rubber
In this manual: Maintenance
~1min read

1. Lift the driver side wiper arm first, then the passenger side.

2. Press and hold the tab, then slide the blade from the wiper arm.
NOTICE
Avoid dropping the wiper arm; it may damage the windshield.

3. Slide the wiper blade out from its holder by pulling the tabbed end out.

4. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.

5. Slide the new wiper blade onto the holder from the bottom end.
► The tab on the holder should fit in the indent of the wiper blade.
6. Slide the wiper blade onto the wiper arm until it clicks.
7. Lower the passenger side wiper arm first, then the driver side.
Was this page helpful?