Features
Compass Calibration
In this manual: Features
~1min read
If the compass indicates the wrong direction, or the compass display blinks, you need to manually calibrate the system.

1. Turn the ignition switch to ON
.
2. Press and hold the SETUP button until the display shows the compass setting menu list.
3. Rotate
to select Calibration, then press
.

4. When the display changes to Start Calibration, press
.
5. Drive the vehicle slowly in two circles.
► The compass starts to show a direction after the calibration. The CAL indicator goes off.
Calibrate the compass in an open area.
While setting the compass:
• The RETURN button returns to the previous screen.
• The SETUP button cancels the setting mode.
Was this page helpful?