Body

Rearview Mirror Replacement

6steps
~36min
2/5difficulty
010203040503.93N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Without Automatic Dimming Mirror

  1. Loosen the screw with a TORX T20 bit.

  2. Slide the rearview mirror (A) rearward and off the mount (B).

  3. Install the mirror in the reverse order of removal, and apply medium strength liquid thread lock to the TORX screw.


With Automatic Dimming Mirror

  1. Disconnect the connector (A), and remove the mirror harness cover (B) from the mirror base (C).

  2. Loosen the screw with a TORX T20 bit, then slide the rearview mirror (A) rearward and off the mount (B).

  3. Install the mirror in the reverse order of removal, and note these items:

    • Before installing the mirror, remove the TORX screw, and apply medium strength liquid thread lock to it.

    • Make sure the connector is plugged in properly.