HVAC
Recirculation Control Motor Replacement
In this manual: HVAC
6steps
~36min
2/5difficulty
Done 0 of 6
Removal
Remove the blower unit.
Remove the self-tapping screws and the recirculation control motor (A) from the blower unit.
Installation
Make sure the damper lever pins in the motor lever are visible through the holes. Make sure the recirculation door and linkage move smoothly.
While holding the recirculation control motor (A), install the self-tapping screws.
Install the blower unit.
After installation, make sure the motor runs smoothly.
Was this page helpful?