Electrical
Removal
In this manual: Electrical
6steps
~36min
2/5difficulty
Done 0 of 6
Do the battery terminal disconnection procedure.
Remove the driver's kick panel.
Disconnect the connectors from the fuse side of the driver's under-dash fuse/relay box (A).
Remove the mounting bolt (B), release the tab (C), and pull the driver's under-dash fuse/relay box away from the body.
Disconnect the connectors from the back side of the driver's under-dash fuse/relay box, then remove the driver's under-dash fuse/relay box.
Carefully remove the relays by prying under the base of the relay.
NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start or cause other functions to fail.
Was this page helpful?