Body

Yaw Rate-Acceleration Sensor Replacement

6steps
~36min
2/5difficulty
010203040509.47N·mlb·ft
Tightening torque found on this page
Done 0 of 6

NOTE:

  • Do not damage or drop the sensor as it is sensitive.

  • Do not use power tools when replacing the sensor.

  • Check the sensor bracket for a deformation.

  1. Turn the ignition switch to LOCK (0).

  2. Remove the center lower console.

  3. Remove the yaw rate-acceleration sensor (A).

  4. Disconnect the yaw rate-acceleration sensor 4P connector (B).

  5. Install the yaw rate-acceleration sensor in the reverse order of removal.

  6. Do the VSA sensor neutral position memorization.