Hyundai Accent Quiz
Do-it-yourself maintenance

Rear Combination Light

In this manual: Do-it-yourself maintenance
Features of your Hyundai — 192Driving your Hyundai — 36What to do in an emergency — 32Corrosion prevention & appearance care — 23Vehicle maintenance requirements — 34Do-it-yourself maintenance — 54Emission control systems — 8Consumer information, reporting safety defects & binding arbitration of warranty claims — 23Vehicle specifications — 4
~1min read

1. Open the trunk lid (4 Door) or tail gate (3 Door).

2. Remove the cover on the inside of luggage trim.

2. Remove the cover on the inside of luggage trim.

3. Remove the nuts of the rear combination light with a spanner.

3. Remove the nuts of the rear combination light with a spanner.


4. Detach the rear combination lamp by pulling it out (4 Door) or remove the

4. Detach the rear combination lamp by pulling it out (4 Door) or remove the mounting screws of the rear combination lamp with a phillips screwdriver (3 Door).

5. To replace the rear combination light, take it out from the bulb holder by

5. To replace the rear combination light, take it out from the bulb holder by turning it counterclockwise.

(1) Tail Light
(2) Turn Signal Light
(3) Back-up Light
(4) Stop/Tail Light
6. Install the new bulb.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.