Hyundai Elantra AD Quiz
Engine Electrical System

Alternator Repair Procedures

In this manual: Engine Electrical System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
6steps
~36min
2/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the drive belt. (Refer to Engine Mechanical System - "Drive Belt")
  3. Disconnect the alternator connector (A) and the cable (B) from the alternator "B" terminal.
  4. Remove the alternator (B) after loosening the mounting bolts (A).

Installation

  1. Install in the reverse order of removal.
  2. After installation, adjust the alternator belt tension. (Refer to Engine Mechanical System - "Drive Belt") Alternator mounting bolt: [12 mm (0.47 in) bolt] 19.6 ~ 26 N·m [14 mm (0.55 in) bolt] 29.4 ~ 41 N·m

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.