Hyundai Elantra AD Quiz
Steering

Heated Steering Wheel Repair Procedures

In this manual: Steering
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
10steps
~60min
3/5difficulty
Done 0 of 10

Removal

Steering Wheel Heater Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the upper part of the floor console assembly. (Refer to Body - "Floor Console Assembly")
  3. Disconnect the connector (A).
  4. To install, reverse the removal procedure.
Heated Steering Wheel Control Module (Body Control Module (BCM))
  1. Disconnect the negative (-) battery terminal.
  2. Remove the glove box. (Refer to Body - Glove Box Assembly Upper Cover)
  3. Remove the smart key unit. (Refer to Body - "Smart Key Unit")
  4. Disconnect the connectors from the Body Control Module (A).
  5. Remove the Body Control Module (A) after loosening the mounting nuts.
  6. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.