Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Hood Assembly Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
2steps
~12min
1/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 2

Replacement
  • Be careful not to damage the hood and body.
  • An assistant is required to remove or install the hood.
  • When removing the clips, use a clip remover.
  1. After removing the hood hinge mounting bolts (A), remove the hood assembly (B).

    Tightening torque: 21.6 ~ 26 N·m

  2. To install, reverse the removal procedure.
    • Make sure the hood latches/unlatches and opens/closes properly.
    • Adjust the hood alignment.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.