Hyundai Elantra AD Quiz
Body Electrical System

Immobilizer control unit repair procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver airbag module assembly. (Refer to Body - "Driver Airbag Module Assembly")
  3. Disconnect the immobilizer unit connector, then remove the immobilizer unit (A) after loosening the nut.

Installation

  1. Install the immobilizer control unit after connecting the unit connector.
  2. Install the driver airbag module assembly.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.