Hyundai Elantra AD Quiz
Body Electrical System

Power Seat Memory Switch Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
9steps
~54min
2/5difficulty
Done 0 of 9

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver door trim panel. (Refer to Body - "Front Door Trim Panel")
  3. Disconnect the power seat memory switch connector (A).
  4. Remove the power memory switch (A) after releasing the mounting clips.

Installation

  1. Install the power seat memory switch (IMS).
  2. Install the door trim panel.
  3. Connect the negative (-) battery terminal.

Inspection

  1. Disconnect the power seat memory connector.
  2. When pressing each switch, check the power supply between the power seat memory switch connector and ground. If the electrical value does not meet the specification, replace the switch.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.