Hyundai Elantra AD Quiz
Body Electrical System

Power Door Lock Switch Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
6steps
~36min
2/5difficulty
Done 0 of 6

Inspection

Power Door Lock Switch Inspection
  1. Check the circuit continuity between terminals. If there are deviations, replace the switch.

Removal
  • Be careful not to scratch the door trim and other parts.
  • Handle with care during storage and during disassembly/assembly, as it is easily contaminated by grease and oil.
Driver Window Switch
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim panel. (Refer to Body - "Front Door Trim")
  3. Remove the power window switch assembly by releasing the mounting clips.

Installation

  1. Install the power window switch assembly.
  2. Install the front door trim panel after connecting the connector.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.