Rear Coil Spring Repair Procedures

Removal

1. 1
   Loosen the wheel nuts slightly.
2. 2
   Raise the vehicle and make sure it is securely supported.
3. 3
   Remove the rear wheel and tire (A) from the front hub.

   Tightening Torque: 107.9 ~ 128 N·m

   

   Be careful not to damage the hub bolts when removing the rear wheel and tire (A).

4. 4
   Remove the parking brake cable fixed clip (A).

   

5. 5
   Pull the wrench in the direction shown by the arrow below to loosen the cable, then remove the parking brake cable (A).

   

6. 6
   Loosen the bolt and nut and remove the rear shock absorber (A) from the torsion beam axle.

   Tightening torque: 98.1 ~ 118 N·m

   

7. 7
   Remove the coil spring.

   

8. 8
   To install, reverse the removal procedure.