Repair Procedures

Inspection

1. 1
   Turn the steering wheel so that the front wheels point straight ahead.
2. 2
   Measure the distance the steering wheel can be turned without moving the front wheels.

   Standard value: 30 mm (1.18 in) or less

   

3. 3
   If the play exceeds the standard value, inspect the steering column, shaft, and linkage.
4. 4
   Place the vehicle on a level surface and set the steering wheel to the straight-ahead position.
5. 5
   Attach a spring scale to the steering wheel. With the engine running at 600 ± 100 rpm, pull the scale and read the value as soon as the tires start to turn.

   Standard value: 3.0 kgf or less

   

6. 6
   If the measured value exceeds the standard value, inspect the power steering gear and the ESP system.