Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
6steps
~36min
2/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Replacement

  1. Remove the plug hole.
  2. Loosen the mounting nuts and remove the wiper arm (A).

    Tightening torque: 22.6 ~ 26 N·m

  3. Using a screwdriver or remover, remove the side cover of the cowl (A).
  4. Disconnect the washer nozzle (A).
  5. Disconnect the clips, then remove the cowl top cover (B).
  6. To install, reverse the removal procedure.
    • Replace any damaged clips (or pin-type retainers).

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.