Repair Procedures

Replacement

Wear gloves to avoid cutting your hands.

When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components. When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface. Be careful not to bend or scratch the trim and panels.

1. 1
   Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
2. 2
   Remove the rear seatback assembly. (Refer to Rear Seat - "Rear Seat Assembly")
3. 3
   Remove the rear door sill trim. (Refer to Interior Trim - "Door Scuff Trim")
4. 4
   Loosen the mounting screws, then remove the center partition trim (A).
5. 5
   Remove the luggage compartment floor mat (B).
6. 6
   Remove the rear crossmember trim (C).
7. 7
   Remove the rear wheel arch trim (D).
8. 8
   Loosen the mounting screws, then remove the luggage compartment side trim (E).
9. 9
   To install, reverse the removal procedure.

   Replace all damaged clips.