Hyundai Elantra AD Quiz
Body Electrical System

Start/Stop Button Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lower hazard switch panel. (Refer to Body - "Lower Hazard Switch Panel")
  3. Remove the Start/Stop button (B) after disconnecting the connector (A).

Installation

  1. Install the Start/Stop button.
  2. Install the emergency pad lower panel.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.