Hyundai i20 Quiz
Body Work (Interior and Exterior)

Rear Seat Belt Buckle Repair Procedures

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
4steps
~24min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 4

REPLACEMENT

  1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat")
  2. Disconnect the rear seat belt buckle connector (B).
  3. Loosen the fixing bolt and remove the rear seat belt buckle (B). (LH)

    Tightening torque: 39.2 ~ 54 N·m

    (RH)

    Tightening torque: 39.2 ~ 54 N·m

  4. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.