Hyundai i20 Quiz
Body Work (Interior and Exterior)

Front Seat Frame Repair Procedures

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
5steps
~30min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 5

REPLACEMENT

  1. Remove the front seatback rear cover. (Refer to Front Seat - Front Seat Back Cover)
  2. Remove the front seat cushion cover. (Refer to Front Seat - Front Seat Cushion Cover)
  3. Remove the side airbag (SAB) module. (Refer to Airbag System - Side Airbag (SAB) Module)
  4. After loosening the mounting bolts, remove the seatback frame assembly (A) and cushion frame assembly (B) from the front seat cover.

    Tightening torque: 44.1~54 N·m

  5. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.