Rear Bumper Cover Repair Procedures

REPLACEMENT

1. 1
   Using a screwdriver or removal tool, remove the rear combination lamp cover (A).

   

2. 2
   After loosening the mounting screws, remove the rear combination lamps (A).

   

3. 3
   Disconnect the rear combination lamp connector (A).

   

4. 4
   Loosen the mounting bolts.

   

5. 5
   After loosening the clip and nuts on the rear bumper side mounting, remove these sides.

   

6. 6
   Release the locking latch, then remove the rear bumper cover (A).

   

7. 7
   Disconnect the rear bumper main connector (A).

   

8. 8
   To install, perform the removal procedure in reverse order.