Emission Control System
Repair Procedures
In this manual: Emission Control System
4steps
~24min
2/5difficulty
Done 0 of 4
Inspection
- Disconnect the evaporation hose from the PCV valve, then remove the PCV valve.
- Connect the PCV valve to the evaporation pipe.
- Start the engine at idle and place a finger over the end of the PCV valve to check that vacuum is felt in the intake manifold.

- If no vacuum is felt, check the PCV valve operation. If it operates normally, clean or replace the vapor hose.
Test yourself
A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?