Hyundai i20 Quiz
Body Work (Interior and Exterior)

Repair Procedures

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
7steps
~42min
2/5difficulty
Done 0 of 7

REPLACEMENT

  1. Remove the front bumper. (Refer to Front Bumper - "Front Bumper Cover")
  2. Remove the headlamps. (Refer to Body Electrical System - "Headlamp".)
  3. Remove the front wheel guard. (Refer to Body Side Moldings - "Front Wheel Guard".)
  4. Remove the delta trim. (Refer to Body Side Moldings - "Delta Trim".)
  5. After loosening the mounting screws, remove the front bumper side mounting bracket (A).
  6. After loosening the mounting bolts and nut, remove the fender assembly (A).

    Tightening torque:

  7. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.