Body Work (Interior and Exterior)
Troubleshooting
In this manual: Body Work (Interior and Exterior)
~1min read
TROUBLESHOOTING
| Symptom | Suspected Area | Remedy (Refer to page) |
| Door window cannot be lowered or raised | Glass is installed incorrectly | Adjust its position |
| Regulator motor or regulator is damaged or faulty | Repair or replace | |
| Door cannot be closed or fully opened | Door is installed incorrectly | Adjust its position |
| Door assembly is faulty | Repair or replace | |
| Door hinge is insufficiently lubricated | Lubricants | |
| Hood cannot be fully opened or closed | Hinge pin and latch are not properly aligned | adjust |
| Hood is installed incorrectly | adjust | |
| Incorrect gap between bumper and hood | adjust | |
| Water leaks through the windshield and rear window | Seal is faulty | Seal with weatherstrip |
| Edge of windshield or rear window glass is defective | Correct |
Test yourself
A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?