Hyundai Kona Quiz
Body (Interior and Exterior)

Front Bumper Cover Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
5steps
~30min
2/5difficulty
Done 0 of 5

Replacement

  1. Loosen the pin clips and upper bolts of the front bumper.
  2. Loosen the lower front bumper mounting clips.
  3. After loosening the pin clips and side screws, disconnect the side of the front bumper (A).
  4. Remove the front bumper cover (A).
  5. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.