Hyundai Kona Quiz
Body (Interior and Exterior)

Hood Assembly Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
2steps
~12min
1/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 2

Replacement

  1. Loosen the hood hinge mounting bolts (A), then remove the hood assembly (B).

    Tightening Torque: 21.6–26 N·m

  2. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.