Hyundai Kona Quiz
Body (Interior and Exterior)

Outside Rear View Mirror Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
4steps
~24min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement

  1. Using a screwdriver or removal tool, remove the front door inside quadrant cover (A).
  2. Disconnect the outside rear view mirror connector (A).
  3. After loosening the mounting nuts, remove the outside rearview mirror (A).

    Tightening torque: 6.9–10.8 N·m

  4. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.