Hyundai Kona Quiz
Body (Interior and Exterior)

Rear Seat Belt Pretensioner Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
5steps
~30min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Replacement

  1. Remove the luggage compartment side trim. (Refer to Interior Trim - "Luggage Compartment Side Trim")
  2. Remove the rear pillar garnish. (Refer to Interior Trim - "Rear Pillar Trim")
  3. Loosen the mounting bolt and remove the lower seat belt anchor (A).

    Torque: 39.2 – 54 N·m

  4. Loosen the mounting bolt and remove the second row seat belt retractor (A).

    Torque: 39.2 – 54 N·m

    [LH]
    [RH]
  5. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.