Hyundai Kona Quiz
Body (Interior and Exterior)

Rear Spoiler Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
7steps
~42min
2/5difficulty
010203040506.45N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Replacement

  1. Remove the rear door upper trim. (Refer to Rear Door - Rear Door Trim)
  2. Disconnect the upper stop lamp connector (A).
  3. Disconnect the rear washer nozzle (A).
  4. Remove the rear spoiler cover (A).
  5. Loosen the mounting nuts and remove the rear spoiler (A).

    Tightening torque: 5.9–6.4 N·m

  6. Loosen the mounting screws and remove the upper stop lamp (A).
  7. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.