Hyundai Kona Quiz
Body (Interior and Exterior)

Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
6steps
~36min
2/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Replacement

  1. Remove the plug hole cover (A).
  2. Remove the cap and nuts, then remove the wiper arm (A).

    Tightening torque: 22.6–26 N·m

  3. Using a screwdriver or removal tool, remove the upper side cover of the shroud (A).
  4. Disconnect the washer nozzle (A).
  5. Disconnect the clips, then remove the cowl top cover (B).
  6. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.